Tubular Membranes

Tubular Membranes

PCI Membranes manufactures an extensive range of tubular reverse osmosis, nanofiltration, ultrafiltration and microfiltration membranes, which are particularly suited to fluids with high viscosity and/or suspended solids, as their wide flow paths make them highly resistant to blocking.

Pre-treatment requirements are minimal, and are often completely avoided – a benefit that makes membranes the most cost effective choice for many systems.

Our development chemists continuously refine product performance to expand our range, extending the benefits to users to offer. Our in-house development and manufacturing capability enables us to provide customised membranes tailored for specific applications. This can prove highly beneficial where short process development times are the key.

New developments include hydrophilic membranes for lower fouling, improved selectivity, increased solvent, acid and base resistance, improved flux and strengthened membrane supports.

All tubular membranes are produced “in-house” in our purpose-built facility, operating under the international Quality Assurance standard ISO 9001:2015.

TypeApplicationLengthDiameterMembrane AreaStandard Options/Comments
A5UF3.1m
3.7m
83mm
83mm
4.0m²
4.75m²

Shroud AISI 316 Stainless Steel
A19 UF 3.1m
3.7m
83mm
83mm
2.1m²
2.5m²
Shroud AISI 316 Stainless Steel
A37 UF 3.7m 119m5.1m² Shroud AISI 316 Stainless Steel
B1 Parallel Flow UF 1.2m
2.4m
3.7m
100m
100m
100m
0.9m²
1.7m²
2.6m²
For highly viscous materials, and low pressure drop
B1 Twin-Entry UF 1.2m
2.4m
3.7m
100m
100m
100m
0.9m²
1.7m²
2.6m²
End-caps in Metals and Alloys used in food contact materials. Shroud AISI 316 Stainless Steel
B1 Series FlowRO, NF, UF 1.2m
2.4m
3.7m
100m
100m
100m
0.9m²
1.7m²
2.6m²
End-caps in epoxy or AISI 316 Stainless Steel. Shroud AISI 316 Stainless Steel
C10NF, UF 0.9m
1.8m
3.7m
210m
210m
210m
2.5m²
5.0m²
10.5m²
DWI approved ABS wetted parts
Micro 240RO, NF, UF0.3m63.5mm 0.024m² AISI 316 stainless steel module (2 membrane tubes). Membrane micropacks available.
Micro 960 RO, NF, UF 1.2m63.5mm0.096 m² AISI 316 stainless steel module (2 membrane tubes). Membrane micropacks available.
Single Tube RO, NF, UF 1.2m12.5mm0.283 m² For comparing up to 6 membrane tubes.